Photodynamic Therapy:

From: The American Cancer Society Website
What Is Photodynamic Therapy?

Photodynamic therapy (PDT) is a treatment that uses special drugs, called photosensitizing agents, along with light to kill cancer cells. The drugs only work after they have been activated or "turned on" by certain kinds of light. PDT may also be called photoradiation therapy, phototherapy, or photochemotherapy.

Depending on the part of the body being treated, the photosensitizing agent is either put into the bloodstream through a vein or put on the skin. Over a certain amount of time the drug is absorbed by the cancer cells. Then light is applied to the area to be treated. The light causes the drug to react with oxygen, which forms a chemical that kills the cells. PDT might also help by destroying the blood vessels that feed the cancer cells and by alerting the immune system to attack the cancer.

The period of time between when the drug is given and when the light is applied is called the drug-to-light interval. It can be anywhere from a couple of hours to a couple of days, depending on the drug used.

Pros And Cons Of PDT

Studies have shown that PDT can work as well as surgery or radiation therapy in treating certain kinds of cancers and pre-cancers. It has some advantages, such as:

But PDT Has Limits, Too:
What Is PDT Used For?

PDT can be used in people with certain types of cancer to help them live longer and improve their quality of life. Although PDT works and causes few long-term problems, it's not widely used to treat cancer today. Still, it is offered in some treatment centers, and is being studied in many clinical trials. It's becoming more widely recognized as a valuable treatment option for localized cancers (cancers that have not spread far from where they started).

PDT is also used to treat pre-cancers of the skin, and is being tested against pre-cancers in the mouth and other places.

PDT Drugs Approved In The U.S. To Treat Cancer

Several photosensitizing agents are currently approved by the US Food and Drug Administration (FDA) to treat certain cancers or pre-cancers.

Porfimer Sodium (Photofrin®). Porfimer sodium is the most widely used and studied photosensitizer. It's activated by red light from a laser. It's approved by the FDA to treat patients with:

Cancer of the esophagus (the swallowing tube) to relieve symptoms when a tumor totally blocks the esophagus or partly blocks the esophagus and can't be treated with laser therapy alone.

Barrett's esophagus with dysplasia, a pre-cancerous condition that may lead to esophageal cancer in people who don't have surgery. A type of non-small cell lung cancer that affects the lining of the large breathing tubes (bronchi) called endobronchial cancer. PDT can help to shrink tumors that are blocking the bronchi. It's used if there is very little spread of the cancer cells (the cancer is micro-invasive). PDT can help those who can't have other types of treatment, such as surgery or radiation therapy.

Aminolevulinic acid (ALA or Levulan®). Aminolevulinic acid is a drug that's put right on the skin. It's used to treat actinic keratosis (AK), a skin condition that can become cancer, and is used only on the face or scalp. A special blue light, rather than laser light, is used to activate this drug.

Methyl ester of ALA (Metvixia® cream). Methyl ester of ALA is one of several other forms of ALA that have been developed. A disadvantage of the older forms of ALA is that they do not get into the cancer cells very easily. Newer ester forms, like this one, do. It is approved for treatment of some types of actinic keratoses of the face and scalp. Again, these are skin conditions that can become cancer. Methyl ester of ALA is activated with a red light.

Newer PDT Drugs

Researchers are looking for new PDT drugs, and many are being studied. Photodynamic therapy is also being tested for use against several other types of cancer. See"The future of photodynamic therapy" section below.

Uses And Side Effects Of Specific PDT Drugs

Porfimer sodium (Photofrin) is given through a vein (IV). It travels through the bloodstream and is absorbed by both normal and cancer cells all over the body. The normal cells get rid of most of the porfimer sodium over a couple of days. But a lot of the drug stays in the cancer cells, with less in normal cells.

Porfimer sodium alone does not destroy cancer cells. It must be activated or "turned on" with light. This is done about 2 or 3 days after the drug is given. (This gives normal cells a chance to get rid of the drug.) The doctor directs a laser light at the area of cancer cells using a very thin fiber-optic glass strand.

To treat esophageal cancer or Barrett's esophagus, the fiber-optic strand is passed down the throat through a thin, flexible tube called an endoscope. For lung cancer treatment, the strand is passed through a bronchoscope, which is an endoscope designed to go into the lungs.

The laser used is a low-power light so it does not burn. It causes little or no pain. The light is applied for 5 to 40 minutes, depending on the size of the tumor. Any dead tissue left in the treated area is removed about 4 or 5 days later during endoscopy or bronchoscopy. The treatment can be repeated if needed.

Who Should Not Get Treated With Porfimer Sodium?
Porfimer Sodium Is NOT Recommended For People With:
Possible Side Effects

The major possible side effects from porfimer sodium are photosensitivity reactions (reactions triggered by light) and swelling in the treated area. Swelling may cause pain or trouble swallowing or breathing. Other minor side effects are possible, too.

Photosensitivity reactions: As soon as porfimer sodium is put into the bloodstream, it starts to collect in the cells of the body. Some of it will stay in the cells for several weeks. The skin and eyes become very sensitive to light during this time. If exposed to sunlight or other forms of bright light, the skin can quickly become swollen, sunburned, and blistered. It takes only a few minutes for this to happen, so it's very important to protect the eyes and skin during this time.

After you get porfimer sodium, you should take precautions (see below) for at least 30 days to prevent reactions. Sensitivity to light can last as long as 3 months, but the length of time is different with each person. If you have a reaction, call your doctor right away.

You should try to avoid bright lights and direct sunlight, but you don't have stay in dark rooms. Some indoor light is important because it will help to slowly break down the drug in your skin. As this happens, your skin becomes less sensitive to light over time. Ask your doctor when and how you should test your skin for photosensitivity. This is usually done no sooner than 30 days after you get the drug.

You can help prevent a photosensitivity reaction if you prepare before treatment and use precautions after it. Here are some ways to do this:

Before going to your doctor's office or hospital for treatment, close the shades and curtains on the windows in your home. Be sure windows and skylights are fully covered.

Bring dark sunglasses, gloves, a wide brimmed hat, long pants, socks, shoes, and a long-sleeved shirt to wear after your appointment. Clothing should be light in color and the fabric should be tightly woven.

Do not count on sunscreen to protect you. Most sunscreens only protect against ultraviolet (UV) light, and they will not prevent a photosensitivity reaction.

For at least 30 days after you get the drug, limit your time outdoors, especially when the sun's rays are strongest (between about 10 am and 4 pm). Cover your skin when you do go outside, even on cloudy days and when you are in the car.

Try to do your daily errands after sundown.

Do not expose your skin to reading lamps or exam lamps (like those used in a dentist's office).

Don't use helmet-type hair dryers (such as those found in beauty salons). High heat can activate any drug left in your scalp and cause redness or burning. If you use a hand-held hair dryer, use a low heat setting.

Swelling in the treated area can lead to pain in the chest or back. If the esophagus is treated, it may lead to narrowing (stricture) of the esophagus, which could cause problems swallowing. Treatment of the breathing tubes or lungs could lead to trouble breathing. If you notice any of these problems, let your doctor know right away.

Other possible side effects depend on the part of the body being treated. If the esophagus is treated, possible side effects include nausea, vomiting, fever, dehydration, headache, scarring and narrowing of the esophagus, hiccups, trouble swallowing, and fluid collecting around the lungs. In people treated for lung cancer, possible side effects include shortness of breath, coughing up blood, fever, pneumonia, and bronchitis.

If you are treated with porfimer sodium, ask your doctor which side effects you might expect and which you need to report right away. Get the phone number to call if you have problems after regular office hours.

PDT Using Aminolevulinic Acid (ALA)
What Is Treatment Like?

Aminolevulinic acid (Levulan Kerastick) is a solution that's put right on the spots (called lesions) of actinic keratosis. Unlike porfimer sodium, it does not reach other parts of the body. This means the lesions are sensitive to the light but the rest of the body is not.

The drug is left on the affected skin for about 14 to 18 hours, usually until the next day. At that time your doctor will expose the area being treated to a blue light for about 15 minutes. During the light therapy you and the doctor will wear protective eyewear. You may feel stinging or burning once the area is exposed to the blue light, but it should go away within a day or so. The treated area may get red and scale and crust for up to 4 weeks before healing. If a lesion does not completely go away after treatment, it can be treated again 8 weeks later.

Who should not get treated with aminolevulinic acid? Aminolevulinic acid is NOT recommended for people with skin sensitivity to blue light, people with porphyria, or anyone with an allergy to porphyrins.

Possible side effects. Photosensitivity reactions caused by light can show up on the skin where the drug is applied. They usually involve redness and a tingling or burning sensation. For about 2 days after the drug is used, you should take care to not expose treated areas of your face and scalp to light.

Skin changes: The treated skin will likely turn red and may swell after treatment. This usually peaks about a day after treatment and gets better within a week. It should be gone about 4 weeks after treatment. The skin may also be itchy or change color after treatment.

Talk to your doctor about what you should expect your treated skin to look and feel like. Also ask about which side effects you should report right away and what phone number to call if you have problems after regular office hours.

PDT Using Methyl Ester Of ALA
What Is Treatment Like?

Methyl ester of ALA (Metvixia cream) is used very much like aminolevulinic acid. It's a cream that's put on the skin of the face or scalp to treat actinic keratosis lesions. The doctor will likely first scrape the area with a small, sharp blade. The lesions where the cream is applied will become sensitive to light, but the rest of the body will not. (This drug does not reach other parts of the body.) The cream should not be left on the skin for more than 4 hours.

The cream is applied and covered with a bandage. About 3 hours later the doctor will take off the bandage, wash off the cream, and expose the area to a red light source for 5 to 20 minutes. During the light therapy you and the doctor will wear protective goggles. You may feel stinging or burning when light reaches the area. Two treatment sessions are usually done 7 days apart. The treated area may turn red, blister, scale, and crust for up to 10 days before healing. The doctor will look at the lesion about 3 months after the last treatment to see whether it worked.

Who Should Not Get Treated With Methyl Ester Of ALA?
Methyl Ester Of ALA Is NOT Recommended For Those With:
Possible Side Effects

Photosensitivity reactions: These are reactions triggered by light. They can happen at the area where the drug was applied, and usually involve redness and stinging or burning. You should stay out of the sun, away from bright indoor lights, and avoid extreme cold after the cream is applied and before the light treatment is done. For about 2 days after the light treatment, you should take care to keep the treated area away from any light.

Skin changes: The skin being treated will likely turn red and may blister and swell after treatment. Burning and stinging are common. The skin may also be itchy, scaly, or change color after treatment. These side effects should get better with time and should be gone by 3 weeks after treatment. If they get worse or are not gone in 3 weeks, call your doctor. Ask what other side effects should be reported to the doctor and what phone number you should use if you have problems after regular office hours.

Allergic reactions: Repeated exposure to methyl ester of ALA cream can cause sensitization, or development of allergy to the cream. Rashes such as eczema and hives (raised itchy bumps) can appear at the area of contact within a few hours after exposure to the cream. Very rarely, more serious allergic reactions can happen.

Valid HTML 5.0Valid CSS2Cynthia TestedSection 508 ApprovedWAi-AA Compliant